THROUGH FITTING / HERRAJE PASANTE

This hardware has been manufactured by Cold Chamber Die Casting, also called aluminum injection, which consists of an aluminum alloy which is selected to provide high resistance to corrosion; The molten material is automatically fed from an external melting pot or furnace to the injection chamber, where a hydraulically operated plunger pushes it into the mold.

The recommended span distances for the use of this product may be reduced in the case of areas with high winds, or turbulent weather. The Client must request the corresponding modification, in case they require a similar solution or with an alteration in the displayed design.

This hardware is used to suspend the cable on the poles in direct line sections without any change of direction. Applies in urban areas whose spans have lengths of up to 150 meters. The suspension set is made up of an injected aluminum through fitting that holds the ADSS cable without the need for protective preforms. This fitting must be attached to the structure or post by means of stainless steel straps and buckles.